The simple instruction of Multifunctional Embroidery And Sewing Integrated Machine
1. Getting Started
• Plug into a 110–240V outlet and turn on the power switch.
• Insert the embroidery hoop or presser foot (switch using the lever).
• Thread the machine: Follow labeled guides for upper/lower threading.
2. Basic Sewing Mode
• Select stitch type (straight, zigzag, etc.) via the LCD screen.
• Adjust stitch length (0–5mm) and width (0–7mm) using the +/– buttons.
• Use the foot pedal or start/stop button to control speed.
3. Embroidery Mode
• Attach the embroidery hoop to the arm.
• Transfer designs: Connect via USB or use the built-in designs
• Position fabric tautly on the hoop;
• Press "Embroidery Start"-the machine auto-stitches the design.
4. Maintenance Tips
• Clean lint from the bobbin case weekly using the provided brush.
• Oil moving parts monthly (check manual for oil points).
• Replace the needle every 8–10 project hours or if bent.
5. Troubleshooting
• Thread breaks? Rethread and check tension dials.
• Uneven stitches? Adjust presser foot pressure or re-hoop fabric.
• Machine jammed? Turn off, remove fabric gently, and restart.
For detailed guides, contact us to know more. Happy crafting! 🧵✨
Safety Notes:
• Always unplug when cleaning or changing parts.
• Keep hands clear of the needle area during operation.